Forged Steel Two Piece Flange Ball Valve

The GMK’s Forged Steel Two Piece Flange Ball Valve also has choices for the ends of the valve that are threaded and fastened respectively. It is attainable as a Full Bore in ASME 150 & 300 Class for Flanged ends in a dimension range that runs from 15 mm to 200 mm and may be produced out of carbon steel, stainless steel, or duplex steel. Additionally, the flanged ends can be a variety of different sizes. For the flanged ends, carbon steel, stainless steel, or duplex steel are all viable options for the material that will be utilized.

  • Size:DN15-DN150
  • Material:A105,LF2,F11,F22,F304,F304L,F316,F316L F904L Allay20 ect
  • Connection:Flange
  • Media:Water

CE Certification

ISO Standards

Warranty Included


The GMK’s Forged Steel Two Piece Flange Ball Valve may now be purchased as an available upgrade option for the Two Piece Design Ball Valve, which has a Fire Safe Design. This option was not previously available for purchase. This update may now be requested for purchase. Actuation of GMK 2c design ball Valves may be achieved by any one of four distinct means, namely through the use of a manual lever, a gear unit, a pneumatic actuator, or an electronic actuator. These four approaches are listed in the following order:


  • Low Torque in 2 piece Ball Valves
  • The mounting arrangement according to ISO 5211 is available upon request
  • Upon request, the Locking Provision will be in the Open or Close Position.
  • Ball Valves Made of Two Pieces Have a Gland-Type Sealing Arrangement
  • A Healthier Lifespan
  • Clear and Present Danger
  • Rapid and Deft in Action
  • No Lubrication
  • Conveniently Sized
  • Reduced Fall in Pressure
  • Simplicity
  • Different kinds of materials for the body and the trim


  • Full&Reduce Bore
  • Blow-Out Proof Stem
  • Fire Safe Seat Sealing
  • Interlocking Device
  • Anti-Static Device
Size DN15-DN150
Material A105,LF2,F11,F22,F304,F304L,F316,F316L F904L Allay20 ect
Connection Flange
Media Water
Supply Ability 10000 Piece/Pieces per Month
Port Wenzhou/shanghai
Payment Terms L/C,D/A,D/P,T/T
  • Design And Manufacture: BS5351,MSS SP-118
  • Connection ends: ANSI
  • Test And Inspection: AP598
  • Material Standard: ANSI,ASTM
Can we order goods from you directly?
Yes, we look forward to receiving your order. However, please note our minimum purchase quantity. If you require smaller quantities we will be happy to arrange an individual delivery. We would be delighted to assist you.
Can I get a discount?
This depends on the specific situation, you can call directly to consult.