Y Type Bellows Seal Globe Valve

When it comes to Bellows Seal Globe Valve, There are, without a doubt, a few additional categories as well. Y-type bellows seal globe valve creates a flow path that is more direct (at full openness). Its structure and body make it an excellent choice for use in applications that need high pressure and where pressure dropping is a common problem. It has an excellent ability to turn things off.

  • Supply Ability:10000 Piece/Pieces per Month
  • Port:Wenzhou/shanghai
  • Payment Terms:L/C,D/A,D/P,T/T

CE Certification

ISO Standards

Warranty Included


By using the Y Type Bellows Seal Globe Valve configuration of the valve, it is feasible to prevent the pressure drop that is often seen when employing globe valves. The seat and stem of the Y-type globe valve are angled at an angle of about 45 degrees with regard to the axis of the pipe when the valve is configured in this manner. Because of the angle, the stem, the bonnet, and the packing are all exposed to pressures that are rather high. 


  • It has a long cycle life that is assured to be achieved.
  • BELLOWS are designed for and tested to work well in environments with high levels of pressure and temperature.
  • The fact that the stem itself does not spin, the presence of thrust bearings inside the stem nut, and the central grease fitting that is used for lubricating the stem nut are all factors that contribute to the LOW TORQUE.
  • The backseat and the stem packing each count as one of the tertiary stem seals.
  • Continuous normal functioning both during and after the fire test is required of safe valves designed to extinguish fires.
  • On-the-fly maintenance is made easy with valve stem-bellows assemblies that include a bonnet because it is quick and easy to remove and replace. 
  • When it comes to cutting through the seal weld, there is specialized power equipment that was created specifically for the task at hand.
Supply Ability 10000 Piece/Pieces per Month
Port Wenzhou/shanghai
Payment Terms L/C,D/A,D/P,T/T
  • Design & Manufacture: DIN 3356
  • Face to Face: DIN 3202
  • Flange end: DIN 2543-2545
  • Test and Inspection: DIN 3230
Can we order goods from you directly?
Yes, we look forward to receiving your order. However, please note our minimum purchase quantity. If you require smaller quantities we will be happy to arrange an individual delivery. We would be delighted to assist you.
Can I get a discount?
This depends on the specific situation, you can call directly to consult.